The composition of aluminum alloy track

The relevant accessories of the aluminum alloy track system can be provided separately, and some of the accessories are as follows: 1. Flexible hanger/rigid hanger (hanging point): connect the wage steel and the slide rail. The height-adjustable design method can be used to avoid the height difference of the steel structure according to the height condition of the hanger. 2. Track trolley/hoist trolley: 1. Low mute, high-strength wear-resistant nylon wheel, easy to run and smooth sliding. 2. Buffer device, rubber anti-collision heads are arranged at both ends of the trolley to prolong the service life of the track and the trolley. 3. With roller device, the trolley can carry out bidirectional load while maintaining good anti-eccentricity ability to ensure accurate positioning of the lifting device. 4. The hoist trolley can be used in series. It can lift the load under 1200kg. 3. Joint components: The length of the track can be infinitely lengthened according to the requirements, so as to realize the seamless docking of the track. 4. Track end cover: prevent dust from entering the inside of the track, maintain the cleanliness of the track, and increase the service life. 5. Beam suspension component: It is used in conjunction with the rail trolley to realize the connection between the longitudinal rail and the transverse rail of the aluminum alloy track, which is divided into 0° hanger and 90° hanger. 6. End stopper: prevent the trolley from sliding out of the aluminum alloy track. Seven, optional: secondary protection device: 1. Track protection device: the connection between the longitudinal rail and the upper steel structure. 2. Beam protection device: the connection between the longitudinal rail and the beam.