Industrial production suspended aluminum alloy track

In industrial production, in order to facilitate transportation, some of the rails are fixed and suspended in the air. The rails are equipped with pulleys, and the workpieces, tooling, tools, etc. are transported or moved by the movement of the pulleys. Most of the existing rails suspended in the air are made of I-shaped steel. Using this kind of rail, the traveling wheels of the pulleys can only be located on the top surface of the I-shaped steel. Since there are no planes on both sides of the I-shaped steel, it is impossible to add guide rollers, When transporting workpieces, workpieces are easy to shake, the pulley is noisy when moving, the curve is easy to get stuck, it is difficult to achieve high-speed movement, the track is heavy, and it is difficult to hang. The utility model relates to a track, in particular to a suspended aluminum alloy track. The structure of the track section is a track vertical plate, the top surface perpendicular to the track vertical plate is connected above the track vertical plate, and the elevation is set on the upper and lower sides of the track vertical plate. Since there are facades on both sides of the track, rollers can be installed on the pulley matching with the track to cooperate with the facades during use, so as to play a guiding role during traveling, so that the pulley can run smoothly without shaking. At the same time, the track also has the advantages of light weight, low noise during movement, smooth surface, easy bending, and high-speed movement.