Aluminum alloy track system with double beams in dust-free workshop

Composition of aluminum alloy track system products and accessories in the form of double beams: 1. Flexible hanger/rigid hanger (lifting point): the height adjustable design method is adopted for connecting the steel and slide rail, and the height difference steel structure can be canceled according to the height condition range of the hanger. 2. Rail trolley/lifting trolley: low noise, high-strength wear-resistant nylon wheel, light operation, smooth sliding 3. Buffer device, rubber anti-collision head is installed at both ends of the trolley to extend the service life of the track and the trolley 4. With a roller device, the trolley can realize two-way bearing, maintain good anti eccentric capacity, and ensure the positioning of the lifting device. 5. The lifting trolley can be used in series. Lifting capacity below 1200kg 6. Joint assembly: the rail length can be infinitely extended as required to achieve seamless rail docking 7. Track end cover: prevent dust from entering the track, keep the track clean, and increase the service life of the track 8. Cross beam suspension assembly: it is used together with the rail trolley to realize the connection of aluminum alloy rail longitudinal rail and cross rail. Divided into 0 ° hanger and 90 ° hanger 9. End plug: prevent the trolley from sliding out of the aluminum alloy track 10. Optional: secondary protection device: (1) Rail protection device: connection between longitudinal rail and upper steel structure (2) Beam protection device: longitudinal rail is connected with beam